Vial Cap Sealing Machine (automatic vial capper) including Vial aluminium capping machine is compact model uses for sealing of glass vials. Machine is uses for flip-off cap sealing of duly filled & stoppered injectable glass vials in pharmaceutical industry. Depending on the output required the numbers of sealing heads changes.
.
Duly Stoppered vials are continuously fed from the conveyor of filling machine to the flat conveyor belt of sealing machine and move further through infeed worm for correct spacing and transferred to the infeed starwheel.
Aluminium caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with infeed starwheel picks up aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit starwheel pocket and further moves out on to the flat conveyor belt. Duly sealed vials are collected on out-feed collection tray.
The sterilized, siliconised, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further container is passed between two pressing roller for tight fit fixing of rubber stoppers.
| Model | ACS-60 | ACS-120 | ACS-250 | |
|---|---|---|---|---|
| Number of Heads | Single | Four | Eight | |
| Production Output | Up to 50 vials/minute | Up to 100 vials/minute | Up to 250 vials/minute | |
| Container Diameter | 15mm to 80mm | 15mm to 80mm | 15mm to 80mm | |
| Container Height | 25mm to 180mm | 25mm to 180mm | 25mm to 180mm | |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | ||
| Power Load | 0.5 H. P. | 1 H. P. | 1.5 H. P. | |
| Overall Dimension | 1300mm (L) X 800mm (W) X 1800mm (H) approx. | 1500mm (L) X 900mm (W) X 1800mm (H) approx. | 2000mm (L) X 900mm (W) X 1800mm (H) approx. | |
| Net Weight | 300 kgs. approx. | 500 kgs. approx. | 700 kgs. approx. | |
| Gross Weight | 500 kgs. approx. | 700 kgs. approx. | 950 kgs. approx. | |
| * Power voltage can be adjusted as per customer’s domestic power voltage requirements. * Rights of technical improvements & modification reserved. * Illustrations & dimensions are shown for information purpose only. |
||||